Multiplicative frequency and angular speckle reduction in ultrasound imaging

Abstract

Speckle is the major artifact in ultrasound imaging, and it is well-known that speckle can be reduced by compounding (averaging) images taken either at different frequencies or from different angles. By averaging images of a phantom taken over a frequency range [Formula] and a 90{degrees} span of angles, the combined speckle reduction is demonstrated to be ~ 9x compared to non-compounded images, while the reduction with frequency or angle averaging resulted in reductions of ~ 3x individually. The rf input to the transducer is altered to vary the sound frequency and the phantom is rotated with respect to the transducer to obtain different imaging angles. Numerical simulations of sound scattered by randomly distributed point scatterers showed quantitative agreement with the experiment. Using a commercial system, a 6x reduction in speckle is demonstrated imaging a human wrist. A robot arm is used to move the transducer along a circular path to acquire images at 9 angles separated by 10{degrees}. The commercial system does not allow direct control of the input to the transducer, so the broadband signal detected is Fourier filtered to obtain images at different frequencies with ~ 2x reduced frequency range. Images taken at different angles contain distortions from speed of sound variations and pressure induced by the probe. Two forms of non-rigid image registration are applied to correct for the distortions and create a higher resolution composite image. A design for achieving ~10x speckle reduction with essentially no loss in imaging speed is described.