A generic sequential stimulation adapter for reducing muscle fatigue during functional electrical stimulation

Abstract

BackgroundClinical applications of conventional functional electrical stimulation (FES) administered via a single electrode is limited by rapid onset neuromuscular fatigue. "Sequential" (SEQ) stimulation, involving rotation of pulses between multiple active electrodes, has been shown to reduce fatigue compared to conventional FES. However, there has been limited adoption of SEQ in research and clinical settings. MethodsThe SEQ adapter is a small, battery-powered device that transforms the output of any commercially available electrical stimulator into SEQ stimulation. We examined the output of the adaptor across a range of clinically relevant stimulation pulse parameters to verify the signal integrity preservation ability of the SEQ adapter. Pulse frequency, amplitude, and duration were varied across discrete states between 4-200 Hz, 10-100 mA, and 50-2000 s, respectively. ResultsA total of 420 trials were conducted, with 80 stimulation pulses per trial. The SEQ adapter demonstrated excellent preservation of signal integrity, matching the pulse characteristics of the originating stimulator within 1% error. The SEQ adapter operates as expected at pulse frequencies up to 160 Hz, with a noted failure mode at 200 Hz. ConclusionThe SEQ adapter represents an effective and low-cost solution to increase the utilization of SEQ in existing rehabilitation paradigms.