A New Evidence of Lubrication Hypothesis on Nephila pilipes Spider Silk Spinning

Abstract

In spite of all the efforts on deciphering such spinning process of spiders, the underlying mechanism currently is yet to be fully revealed. In this research, we designed a novel approach to quantitatively estimate the overall concentration change of spider silk along the progression of liquid-to-solid silk transition from the gland silk. As a prior characterization, we first studied the influence of silking-rate, ranged from 1.5 to 8.0 m/min, on spun fiber diameters as well as fiber strengths. Furthermore, the liquid contents of silk in the sac and the silk fibers leaving the spinneret were investigated by thermogravimetric analysis (TGA) and by estimating the ratio of collected dried silk to the weight loss of spider, respectively. The strength of spun silk fiber showed in the range of 7.5 - 8.5 g/denier; while, the fiber diameter of 0.7 - 1.1 deniers for spun silk first increased then decreased with take-up speed of winder. The results showed that the percentage liquid content of silk stored in the major ampullate sac (50.0 wt%) was lower than that of silk leaving the spinnerets (80.9 - 96.1 wt%), indicating a liquid supplying mechanism might be involved during the spinning process. Thus, a hypothesis of liquid coating on the outer surface of the silk thread served as a lubrication layer to reduce the silking resistance in spinning spigot of spider was proposed. In addition, we speculated the spigot serves as a valve-like regulator that controls not only the fiber diameter but also the lubrication layer. These findings provide understanding in physiological function of the spider spinning process and could further shed some light on future biomimetic development of silk material fabrication.