Effect of biomaterial stiffness on cardiac mechanics in a biventricular infarcted rat heart model with microstructural representation of in situ intramyocardial injectate
Y. D. Motchon, K. L. Sack, M. S. Sirry, M. Kruger, E. Pauwels, D. Van Loo, A. De Muynck, L. Van Hoorebeke, N. H. Davies, T. Franz
Abstract
Intramyocardial delivery of biomaterials is a promising concept for treating myocardial infarction. The delivered biomaterial provides mechanical support and attenuates wall thinning and elevated wall stress in the infarct region. This study aimed at developing a biventricular finite element model of an infarcted rat heart with a microstructural representation of an in situ biomaterial injectate, and a parametric investigation of the effect of the injectate stiffness on the cardiac mechanics. A three-dimensional subject-specific biventricular finite element model of a rat heart with left ventricular infarct and microstructurally dispersed biomaterial delivered one week after infarct induction was developed from ex vivo microcomputed tomography data. The volumetric mesh density varied between 303 mm-3 in the myocardium and 3,852 mm-3 in the injectate region due to the microstructural intramyocardial dispersion. Parametric simulations were conducted with the injectates elastic modulus varying from 4.1 to 405,900 kPa, and myocardial and injectate strains were recorded. With increasing injectate stiffness, the end-diastolic median myocardial fibre and cross-fibre strain decreased in magnitude from 3.6% to 1.1% and from -6.0% to -2.9%, respectively. At end-systole, the myocardial fibre and cross-fibre strain decreased in magnitude from -20.4% to -11.8% and from 6.5% to 4.6%, respectively. In the injectate, the maximum and minimum principal strains decreased in magnitude from 5.4% to 0.001% and from -5.4% to -0.001%, respectively, at end-diastole and from 38.5% to 0.06% and from -39.0% to -0.06%, respectively, at end-systole. With the microstructural injectate geometry, the developed subject-specific cardiac finite element model offers potential for extension to cellular injectates and in silico studies of mechanotransduction and therapeutic signalling in the infarcted heart with an infarct animal model extensively used in preclinical research.
02 /Specification & Classification
Click any tag to browse matching papers- Organism
- Assay
- Research Focus
- Approach
Reproducibility ledger
Nobody has reported trying to reproduce this paper yet. Did you replicate an experiment or run the code? Your report saves the next lab a week.
Sign in to file a reproducibility report.
Related papers
- In silico mechanics of stem cells intramyocardially transplanted with a biomaterial injectate for treatment of myocardial infarction
Y. D. Motchon, K. L. Sack, … T. Franz·bioRxiv·May 10, 2023
- Influence of Supraphysiologic Biomaterial Stiffness on Ventricular Mechanics and Myocardial Infarct Reinforcement
R. Ghanta, Y. Zhao, … K. J. Lampe·bioRxiv·May 20, 2020
- Identification of orthotropic material parameters for acute, necrotic, fibrotic and remodelling myocardial infarcts in the rat
M. S. Sirry, L. Dubuis, … T. Franz·bioRxiv·Sep 8, 2019
- A matrix-mimicking bioadhesive epicardium for tunable modulation of biomechanics in the acutely infarcted heart
Claudia Elena Varela, Diego Alonso Quevedo‐Moreno, … Ellen Tunney Roche·bioRxiv·Oct 7, 2025
- Auxetic patch material exhibits systolic thickening and restores pump function in a finite element model of acute myocardial infarction repair
J. Borrello, Z. Zheng, … K. D. Costa·bioRxiv·Nov 2, 2023
- A Framework for Evaluating Myocardial Stiffness Using 3D-Printed Hearts
F. O. Kolawole, M. Peirlinck, … D. B. Ennis·bioRxiv·Feb 21, 2021